NVR can find the cameras, but I see no video.

[Anonymous]

I am struggling to get video transmission on my 16 channel NVR. Could you please assist me in making this connection?

The NVR can find the cameras, but I see no video. I am also not sure which Name and Password to use.

 

[Anonymous]

1. Running the yoosee app, and enable ‘nvr connection’, then modify the password for the connection.

2. Adding the camera to the nvr by using the default username: admin, password should be the one you have modified via the yoosee app.

You can test the connection by playing rtsp stream, the example shows as below:

rtsp://admin:onvif150@192.168.1.141:554/onvif1

Lastly, ensuring both cameras and the nvr are in the same local network.

 

[DavideModena75]

Hi ,
I have made all passages like you write before but nvr continue to add correct camera but i not see any video remain black.
Do you have some idea ?
Thanks

 

[Jackie]

By the way, ensuring the NVR's resolution is higher than the resolution of camera.
E.g. if your NVR only supports 1080p resolution, the NVR will not display video/image when camera's resolution is 3MP/4MP/5MP.
Therefore, you may increase the NVR's resolution, or lower the camera's resolution.