I bought more than 10 cameras because they were onvif now what to do????
After upgrade to 14.0.0.82 onvif stop work
- Thread starter Davi
- Start date
Hi, i try to downgrade to 14.0.0.87 but no work with the old password , then i try some combinations, and even if i set a password for rtsp not work with it,
it work with user admin and password 123
i don't try with firmware 14.0.0.93 with user admin and password 123 ...
The firmware 14.0.0.87 is here https://support.yooseecamera.com/threads/3/
it work with user admin and password 123
i don't try with firmware 14.0.0.93 with user admin and password 123 ...
The firmware 14.0.0.87 is here https://support.yooseecamera.com/threads/3/
They are some solution ?
Update camera's firmware to the latest version.
Reset camera, then setup camera on Yoosee app.
Go to camera's setting, select "RTSP Settings", modify RTSP password and enable RTSP.
Go to your NVR, select the discovered camera's IP address, input username admin, and the RTSP password.
Reference: https://support.yooseecamera.com/threads/2492/#post-4319
Linkternet
New Member
- Joined
- Feb 17, 2019
- Messages
- 7
- Reaction score
- 1
Would you be so kind to share the firmware 14.00.00.91?, I upgraded to 14.00.00.93 and the NVR stopped working.
Regards
Peter Varga
New Member
- Joined
- Mar 25, 2019
- Messages
- 1
- Reaction score
- 0
Would you be so kind to share the firmware 14.00.00.91?
Linkternet
New Member
- Joined
- Feb 17, 2019
- Messages
- 7
- Reaction score
- 1
check previous post
Thank you so much!!, Have a great day!