Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

After upgrade to 14.0.0.82 onvif stop work

Davi said:
Hi,

Anyone have update to latest firmware 14.0.0.82 and lost onvif connectivity on http://192.168.x.x:5000/onvif ?

There is some way to downgrade firmware ?

Thanks.
Click to expand...

I have the same problem too. The firmware version 14.0.0.80 works fine with ONVIF but after upgrade to 14.0.0.82 it did not works anymore.

Admin said:
The ONVIF connection requires using account authorization, the default account is admin, password is 123.
Click to expand...

I don't think authorization account is the issue.
 
Using ONVIF Device Test Tool, I can detect the camera's ONVIF information and play the video.
ONVIF1.jpg

ONVIF2.jpg
 
I have 2 IP camera with the same model. One of it I have upgraded the firmware with v 14.0.0.82 and another one is older version 14.0.0.80. After using ONVIF device tool and click the check button, both camera give device information. But when I click on probe button, camera with v 14.0.0.80 have no error but camera with v 14.0.0.82 give an error. The camera with v 14.0.0.82 also not been able to be discover by ONVIF device manager.

v80.png
v82.png
v80Probe.png
v81DM.png

view
view
view
view
 
Try to use ONVIF Device Test Tool, instead of ONVIF Device Manager, because ONVIF device manager is outdated and not the official tool from ONVIF organization.
 
Anonymous said:
Try to use ONVIF Device Test Tool, instead of ONVIF Device Manager, because ONVIF device manager is outdated and not the official tool from ONVIF organization.
Click to expand...
Yes, I'm using ONVIF Device Test Tool
 
When try to add your Yoosee HD cameras to video software or NVR, please choose "UDP" protocol/mode, not the default "TCP/IP".
iSpy_6.jpg
 
Same problem here. ONVIF worked with 14.0.0.80 but not with 14.0.0.82.
Can we have an upgrade of firmware in order to fix this problem?
Thanks
 
Hi,
Anyone still have firmware 14.0.0.80 ?

Update: Using firmware 14.0.0.77, ONVIF discovery works again. But there is a issue, that some DVRs/HVRs can't stream because onvif response payload from cam, says that main stream is RTSP over TCP, but the correct stream is RTSP over UDP. If you have DVR/HVR that you can modify protocol you are luck.
I have one with a very simple interface that I cant change protocol. I'll wait a fix in firmware for that.

Update2:
Onvif wrong response payload:
Code: 
           <tt:Media>
                    <tt:XAddr>http://192.168.xxx.xxx:5000/onvif/device_service</tt:XAddr>
                    <tt:StreamingCapabilities>
                        <tt:RTPMulticast>false</tt:RTPMulticast>
                        <tt:RTP_TCP>true</tt:RTP_TCP>
                        <tt:RTP_RTSP_TCP>true</tt:RTP_RTSP_TCP>
                    </tt:StreamingCapabilities>
                </tt:Media>


Thanks.
 
Last edited:
Hi how to downgrade firmware 14.0.0.77 on wifi onvif camera and where to download software ONVIF Device Test Tool
 
Thanks for the tip but the firmware in the sd formatted must be open not zip my room is this. Thank you
 

Attachments

  • s-l400.jpg
    s-l400.jpg
    36.3 KB · Views: 19
my onvif stopped after update version 82. the method downgrage by card dont work and ipc dont have manual to operate how i upgrage to version 77?
 
yoosee dont support after version 82 and my camera are broken onvif!!!
 
You must log in or register to reply here.
Back
Top