Ring - the famous brand for smart doorbell cameras recently was taken-over by Amazon. This reflects the reality that potential market for smart doorbell products keep increasing. We are so delighted to present you battery-powered smart doorbell camera which uses Netcam App. The product utilizes Ingenic T20 SoC, featuring super low-power consumption, 1080p H.264 video encoding capability. Incorporating with SmartSens 2-megapixel CMOS image sensor, the smart doorbell camera can deliver crystal clear video with 1920x1080 resolution.
The camera has built-in rechargeable high-capacity battery, so that it can last 90 days for normal use. Equipped with microUSB port for battery recharging. Intending to reduce the power consumption, the camera leverages video-on-demand technology, it only delivers video stream when users open the app and wakes-up the camera or it senses a moving object. The product can boot up within few seconds, you can receive real-time FHD video through smartphone app and PC software.
It owns smart functions, relying on sensitive passive infrared motion sensor, the camera can trigger alarm and send instant push notification when motion alarm happens. You are able to adjust the detecting sensitivity to help you use it and maximum its performance. Unlike yoosee, the camera offers fully control on image parameter, you are able to adjust camera's brightness, contrast, manually turn on/off Infrared LED, flip.
It supports night vision, also adopts IP65 weatherproof design can withstand dust, rain, snow, dew, frost. The product has built-in microSD card slot to support 32GB memory card, no cloud storage is required. It has built-in microphone and speaker, supporting two way voice intercom. After smart doorbell camera installed, you are able to answer the door anywhere, anytime. You also can see, talk with visitors. It supports 2.4G Wi-Fi connection, can be easily hooked in your router.
Product Models:
SD-K2
1080p;
PIR Motion Detection;
Remote Control;
Doorbell Call Button;
Tamper Alarm;
Video Recording;
2 Way Audio; Leave Messages;
Support Max 32GB TF Card;
SD-F3
Smaller Appearance;
Easy to install;
PIR Three adjustable sensitivity;
3 Seconds to push alarm;
1 Second PIR Alarm Recording;
App: Microshare;
Night vision: Dual IR-cut filter auto switch;
SD-K1
Product Upgrade Configuration
Magnet Bracket +3M glue;
Easy to installatin;
Device works witout Lights (Hidden Camera);
1080p;
PIR Motion Detection;
Remote Control;
Video Recording;
SD-F4
Waterproof ( Use under the roof) ;
Smaller Appearance;
Easy to installation;
PIR Three adjustable sensitivity;
3 Seconds to push alarm;
1 Second PIR Alarm Recording;
Night vision
ual IR-cut filter auto switch;
Product Features
The camera has built-in rechargeable high-capacity battery, so that it can last 90 days for normal use. Equipped with microUSB port for battery recharging. Intending to reduce the power consumption, the camera leverages video-on-demand technology, it only delivers video stream when users open the app and wakes-up the camera or it senses a moving object. The product can boot up within few seconds, you can receive real-time FHD video through smartphone app and PC software.
It owns smart functions, relying on sensitive passive infrared motion sensor, the camera can trigger alarm and send instant push notification when motion alarm happens. You are able to adjust the detecting sensitivity to help you use it and maximum its performance. Unlike yoosee, the camera offers fully control on image parameter, you are able to adjust camera's brightness, contrast, manually turn on/off Infrared LED, flip.
It supports night vision, also adopts IP65 weatherproof design can withstand dust, rain, snow, dew, frost. The product has built-in microSD card slot to support 32GB memory card, no cloud storage is required. It has built-in microphone and speaker, supporting two way voice intercom. After smart doorbell camera installed, you are able to answer the door anywhere, anytime. You also can see, talk with visitors. It supports 2.4G Wi-Fi connection, can be easily hooked in your router.
Product Models:
SD-K2
1080p;
PIR Motion Detection;
Remote Control;
Doorbell Call Button;
Tamper Alarm;
Video Recording;
2 Way Audio; Leave Messages;
Support Max 32GB TF Card;
SD-F3
Smaller Appearance;
Easy to install;
PIR Three adjustable sensitivity;
3 Seconds to push alarm;
1 Second PIR Alarm Recording;
App: Microshare;
Night vision: Dual IR-cut filter auto switch;
SD-K1
Product Upgrade Configuration
Magnet Bracket +3M glue;
Easy to installatin;
Device works witout Lights (Hidden Camera);
1080p;
PIR Motion Detection;
Remote Control;
Video Recording;
SD-F4
Waterproof ( Use under the roof) ;
Smaller Appearance;
Easy to installation;
PIR Three adjustable sensitivity;
3 Seconds to push alarm;
1 Second PIR Alarm Recording;
Night vision
ual IR-cut filter auto switch;
Product Features
- 1080p;
- HD image;
- CPU number: T20 Sensor;
- IR cut filter;
- PIR Sensor;
- PIR Detection Distance: 5M
- 2 Way Audio;
- Remote Control;
- Remote wake-up time: 2-3s
- Support Max 32GB TF Card;
- Video compression:H.264;
- Wifi: 2.4GHz; IEEE 802.11b/g/n
- 3000 Ma Polymer Lithium ion Battery Powered;
- Consumption (W): 0.75W (work) 0.0025W (Standby);
- Battery Standby for more than 90 days;
- Push Alarm up to 350 messages for normal use;
- Support Dis-net Video;
- When the Guests press the doorbell call button, doorbell will automatically send a video call to the user app;
- High Performance DSP code chip, the host can cope with a variety of complex situations, rapid response;