after camera firmware updates camera is not open.....

[iOS Shakil]

ip camera model= ipc z06h
after camera firmware updates camera is not open...
issue =Network is busy please try again later...
anybody help me...........

 

[iOS Shakil]

admin sir help me............

 

[Admin]

admin sir help me............

A. Check if camera enters into AP mode.
1. Double checking the power connection of your camera.
2. Go to Wi-Fi setting of your smartphone then check if there is a new Wi-Fi SSID with prefix GW_IPC_your camera ID e.g. GW_IPC_4789012
3. If it does exist, it means the camera switches to AP mode.

For the AP mode function, you can read this article: https://www.unifore.net/ip-video-su...-the-ap-mode-function-for-yoosee-cameras.html

B. If your camera failed to upgrade its firmware, you can manually upgrade its firmware by using IPC debug tool. You may read this post: https://www.unifore.net/ip-video-su...camera-debug-software-download-and-guide.html

 

[mark anthony]

how to view in my pc please help me

 

[iOS Shakil]

A. Check if camera enters into AP mode.
1. Double checking the power connection of your camera.
2. Go to Wi-Fi setting of your smartphone then check if there is a new Wi-Fi SSID with prefix GW_IPC_your camera ID e.g. GW_IPC_4789012
3. If it does exist, it means the camera switches to AP mode.

For the AP mode function, you can read this article: https://www.unifore.net/ip-video-su...-the-ap-mode-function-for-yoosee-cameras.html

B. If your camera failed to upgrade its firmware, you can manually upgrade its firmware by using IPC debug tool. You may read this post: https://www.unifore.net/ip-video-su...camera-debug-software-download-and-guide.html

Dear admin sir...

i already checked. power connection & netwowk interface connection /all ok

but not open it
before camera open ok
after camera firmware updates camera is not open...

issue =Network is busy please try again later...

now always show this issue

 

[Jackie]

Find your camera's IP address, then bind IP address with camera's MAC address in your router.
Here it's the tutorial: https://www.hkvstar.com/technology-...ac-address-of-ip-wi-fi-cameras-dvrs-nvrs.html

 

[Silverfox]

Hi

I'm facing the same issue.

I have two cameras (NEXUS N-VIEW) which both are configured to wifi. Both of them work fine with the app and I can see video clearly. But only if one of them is connected to the wifi. The camera that is connected lastly will not work and I get the "network is busy" message. If I unplug the working camera (no power and thus not on the wifi) the secone camera is suddenly viewable. Bot cameras work fine at the same time if at least one of them are connected via ethernet cable. Only problem is when both are on wifi at the same time.

Are they fighting over a network id?

 

[iOS Shakil]

Find your camera's IP address, then bind IP address with camera's MAC address in your router.
Here it's the tutorial: https://www.hkvstar.com/technology-...ac-address-of-ip-wi-fi-cameras-dvrs-nvrs.html

Wrong Guide.........

 

[Silverfox]

My problem has "fixed itself" I can now connect to all cameras (4 in total) the "network is busy" message still appears sometimes but it seems random. Like if the app is too long to connect to the camera and it times out.

There is a new problem though. When using the motion alarm I get the alarm and the email (after configuring) but most times the email says "check attached picture" but there is no picture attached.