CMSClient software config IPC password error to get parameter

[Jackie]

Trying to config camera on CMSClient software, click "Network", "Record", "Password Setting" , it shows "password error". How to fix this?

The problem occurs when using old CMSClient software which only support local login.
To solve this problem, you should download and install CMSClient V1.00.00.47 version.

Then login with your yoosee account, which is an email address or phone number. You should not login by using local admin account. After logon with your yoosee account, you will have permission to config cameras via CMSClient, password error will not occur.

 

[_Alex_]

The problem persists, there is a password error.

 

[Vym]

Please help me with this.. I have the same problem..
IPC password error

 

[Vasya]

This review details how to solve this problem and other problems with CMS. Unfortunately, only in Russian.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Henry18]

Cannot start monitoring from Yoosee_CMSSetup_1.0.0.53

Hi, I have an Issue: Cannot start monitoring from Yoosee_CMSSetup_1.0.0.53
Device:
Hamrolte Wifi Camera Yoosee ONVIF IP Camera 2MP/1.3MP/1MP Wired Wireless Night Vision Vandal-proof Waterproof Outdoor Camera
Using Samsung S6 - all OK
Yoosee apk ver: 00.46.00.42
Camera device name: Driveway
Camera device ID: 13866837
Using “Wireshark”:
Camera IP address: 192.168.1.15 (shown as “Shenzhen Sanan Technology Co. Ltd”)
Camera MAC address: 10:A4:BE:8E:2B:61
Using Yoosee_CMSSetup_1.0.0.53
Login: Admin login - No password
Device has to be added manually - passwords as for Samsung S6 Yoosee apk
==> Start monitoring: “Padlock on the screen”
==> IPC config: “Password error”
Could please help me
Regards

 

[account123]

Try to login CMSClient by entering your Yoosee account.
The explanation: if camera is not in the same local network (as your computer), after login with default admin account to CMSClient, the software will show pad lock which indicates incorrect password.

 

[Henry18]

Try to login CMSClient by entering your Yoosee account.
The explanation: if camera is not in the same local network (as your computer), after login with default admin account to CMSClient, the software will show pad lock which indicates incorrect password.

Many thanks for reply
My computer IP addr:
IPv4 Address. . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
As advised:
Using Yoosee_CMSSetup_1.0.0.53
Login:
mail/user ID login - Yoosee login email
Password - Yoosee password
Result: Data parameter error
Using Blue Stacks and Yoosee on my computer:
Login to camera succesful - all function available

 

[account123]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Henry18]

Solved - Cannot start monitoring from Yoosee_CMSSetup_1.0.0.53
Device:
Hamrolte Wifi Camera Yoosee ONVIF IP Camera 2MP/1.3MP/1MP Wired Wireless Night Vision Vandal-proof Waterproof Outdoor Camera
Using Samsung S6
Yoosee apk ver: 00.46.00.42
Yoosee login email: Your's_Yoosee_login_email
Yoosee account: Your's_Yoosee_account
Yoosee password: Your's_Yoosee_password
Camera device name: Driveway
Camera device ID: 13866837
Comment - The "Yoosee account" not visible (screen too small)
Use "Blue Stacks" Android simulator and "Yoosee" on computer
Using Yoosee_CMSSetup_1.0.0.53
Login:
mail/user ID login - Yoosee account (Not email)
Password - Yoosee password
Many thanks for help