Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Arm and disarm the yoosee cameras problem

Anonymous

Member
Joined
Aug 3, 2017
Messages
769
Reaction score
24
Hi, I can use Yoosee on my mobile to control arm or disarm status and it works perfectly, I can also add remote controller (433 MHZ) successfully to the Yoosee and Wifi Camera, however, as soon as I pressed the "Arm" button from the remote controller, the camera starts alarming, I suppose the Camera will be at "ARM" status and will only alarm once the motion is detected, am I done anything wrong? or it's a bug? thanks.
 
It seems you are using the remote control from alarm systems. However, it is not fully compatible with the Yoosee cameras.
Therefore, the function of buttons on remote control is wrong. To solve this problem, you have to use the original remote control that can be fully compatible with Yoosee cameras. The below picture is a remote control can work with Yoosee cameras.
e1b1591a30445876b8ebc19699ce865e721ca272f2c42e9fff1ced71814566b3.jpg
 
Back
Top