IP Cam not work onvif and pc software

[Rog3r]

I recently buy 4 cameras yyp2p (yoosee), everything works fine in app ... after installation of CMS software (1.00.00.45_0) the cameras work 10 ~ 15 minutes and then get error ...
I tried to use different softwares with onvif support but get error ...

user: admin
password: 123
port: 5000

----

software fails to find the camera ... discover 1 or 2 (never 4)


rtsp: //ip: 554/onvif1 (works 10 ~ 15 min and then get error)


Please I need help, would it be an fimware problem? (21.00.00.35)

Works after: Camera reset or Restart several times

I have this problem only in CMS Client and PC Softwares
Android or Ios works fine

 

[Admin]

1. Modify the RTSP password
https://support.yooseecamera.com/threads/628/#post-1439

2. Turn DHCP OFF in router and manual assign an IP address to the camera.

 

[Rog3r]

1. Modify the RTSP password
https://support.yooseecamera.com/threads/628/#post-1439

2. Turn DHCP OFF in router and manual assign an IP address to the camera.

Okay, I did it

I still have too much drop / fps variation and delay in some moments in CMS and RTSP so it is normal to happen?

 

[Admin]

If the software allows you to select network/stream type, you may choose "UDP" not the default "http".

 

[Admin]

if this happens when you add remote camera via CMSClient, it's great likely slow connection speed is culprit.

 

[Rog3r]

if this happens when you add remote camera via CMSClient, it's great likely slow connection speed is culprit.

the delay problem was solved ... I changed the gateway address to a nonexistent as well as cameras running only in lan mode

I could not find a way to change a rtsp password through the ipc test tool .... does not show an option to save

how to proceed?

 

[ligeiro]

onvif stoped by yoosee

 

[Minh]

how to downgrade firmware for Yoosee camera, currently my camera running firmware 21.1.0.41. it doesn't support onvif any more.

can you help me please