Hello, all..
i use several yoosee ip cams with different firmware. there are 5 unit versi 14.0.1.33, 5 unit versi 21.0.1.36, and 10 unit versi 28.0.0.26.
The application that I use to monitor IP Cam is CMS version 1.00.00.53.
What I want to ask, why is IP Cam with firmware 14.0.1.33 and 21.0.1.36 RAM used in the CMS application is only about 60MB on 1 unit IP Cam,
but when using IP Cam with firmware 28.0.0.26 the used can be up to 600MB on 1 unit IP Cam.
The RAM on my PC is 16gb DDR4, proccesor interl core I5 gen 7.
and if i connect all ip cam units then the CMS application will be closed force
please explain from the masters. thank you
i use several yoosee ip cams with different firmware. there are 5 unit versi 14.0.1.33, 5 unit versi 21.0.1.36, and 10 unit versi 28.0.0.26.
The application that I use to monitor IP Cam is CMS version 1.00.00.53.
What I want to ask, why is IP Cam with firmware 14.0.1.33 and 21.0.1.36 RAM used in the CMS application is only about 60MB on 1 unit IP Cam,
but when using IP Cam with firmware 28.0.0.26 the used can be up to 600MB on 1 unit IP Cam.
The RAM on my PC is 16gb DDR4, proccesor interl core I5 gen 7.
and if i connect all ip cam units then the CMS application will be closed force
please explain from the masters. thank you