Unable to record with motion detection
- Thread starter Harold
- Start date
Record switch "on"
scheduled alert 00:00 - 23:59alarm type-"motion detection enabled"
alert sensitivity "High"
What am I doing wrong?
Hello
these photos show how I set up the ipcam
with yoosee version 00.56.00.53.
Firmware 21.0.1.36, and registration starts when one is revealed
presence.
However, there are false registrations due to variations in sunlight
these photos show how I set up the ipcam
with yoosee version 00.56.00.53.
Firmware 21.0.1.36, and registration starts when one is revealed
presence.
However, there are false registrations due to variations in sunlight
Attachments
L
Lewis-H
Guest
1. Camera side motion detection; The camera detects motion, and then sends the event to the server, to start recording.
a. Camera side motion detection reduces CPU load.
b. Depending on the make and model of the camera, enter the cameras setup functions.
c. Within the cameras setup functions, enable motion detection.
d. Refer to that cameras documentation, on how to setup camera side motion detection.
2. Server side motion detection; Also called software detection, the server detects motion, and then starts recording.
a. Server side motion detection creates additional CPU load.
3. Sign into the CORTROL management console.
a. Select "Channels", then select/high light the camera of choice.
b. After selecting the camera of choice, select "Edit"
c. From the edit menu, select the "Motion detector" option.
d. From the drop down menu, select either Camera Motion Detection, or Software (High Performance)
e. Select OK, and return to the client.
a. Camera side motion detection reduces CPU load.
b. Depending on the make and model of the camera, enter the cameras setup functions.
c. Within the cameras setup functions, enable motion detection.
d. Refer to that cameras documentation, on how to setup camera side motion detection.
2. Server side motion detection; Also called software detection, the server detects motion, and then starts recording.
a. Server side motion detection creates additional CPU load.
3. Sign into the CORTROL management console.
a. Select "Channels", then select/high light the camera of choice.
b. After selecting the camera of choice, select "Edit"
c. From the edit menu, select the "Motion detector" option.
d. From the drop down menu, select either Camera Motion Detection, or Software (High Performance)
e. Select OK, and return to the client.