I can't connect the cameras to the NVR

[Angela Leo]

I can't connect the cameras D1000g and D1500 to the NVR, As I can see the camera settings in the browser

 

[Jolly Wang]

1. Using the CMSClient to assign a static IP address to the cameras.
2. Trying the wired Ethernet connection instead of Wi-Fi wireless.
3. Making sure the cameras and the NVR are in the same network.
4. Ensuring tick [ONVIF] when try to search the cameras via the NVR.
There is no password for the ONVIF connection.
Just automatically search the camera and don't change the settings.
Additionally, making sure the NVR's resolution is 1920x1080, because the VR camera's resolution is 1280x960.

 

[Admin]

If your NVR can allow you to choose network type, you should change default (TCP/IP) to UDP.

 

[Its music]

hi!