indoor camera not working, manufacturer unknown

[Milos.z]

Hi all,

I have indoor camera which stop working after update via app yoosee, if I remember corretly. Messages from UART interface is attached and also photos.

Could somebody help me?

Thanks a lot

Milos

 

[Sorcino]

Good morning. First of all check which processor uses the ipcam example: "Novatek (Grain Media) GM8135S SoC (Processor) 8MB RAM" or "Hisilicon Hi3518EV100 16MB" or other download the right firmware here "https://shop.yooseecamera.com/firmware" for that processor and uses"IPCTestTool.exe" to update the firmware, look here "Https://support.yooseecamera.com/threads/628/"

 

[Milos.z]

Thanks for your reply. Camera include Grain GM8135s processor. IPCTestTool.exe connects to camera via ethernet? because I can not connect this camera to WiFi and also LAN. Update from SD card not working. SD card was found, but update was not lunched, see attached file.

 

[Milos.z]

sd card was recognized.

 

[Sorcino]

Hello I know only two methods to install a new firmware

Method 1:
Step 1. Format a microsd card by fat32.
Step 2. You can paste file firmware to the root folder of microSDHC memory card and insert it to the camera. Step 3. Press the reset button and do not connect to the power adapter / supply.
Step 4. After 5 seconds, the camera's LED starts to flash, release the reset button, now the camera is flashing its firmware.
The process takes 5 minutes, when it completes, it will reboot.

Method 2:
Using the IPC debug tool to force upgrade the camera's firmware.
Also try following this threads " https://support.yooseecamera.com/threads/3/ "