Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Disassemble Yoosee 720p Wi-Fi Cube Camera

Angela Leo

Member
Joined
Aug 3, 2017
Messages
33
Reaction score
2
Yoosee 720p Wi-Fi cube camera supports CoT Pro and Yoosee App, the camera employs Hisilicon Hi3518EV100 dual-core processor and OV9712 1.0MP CMOS image sensor. I like this camera because it can capture very clear video with vivid color reproduction.
Yoosee_0.jpg

It's easy to disassemble this camera, unscrewing four screws, then open the camera.
Yoosee_4.jpg

Then we disconnect the speaker, and Wi-Fi antenna, pull the camera out from its plastic housing. This camera is equipped with a 2-megapixel 1080P IR lens, focal length 3.6mm, 1/2.7
The WiFi Module is MediaTek MT7601UN
Yoosee_5.jpg

The Wi-Fi antenna is adhered to the front plastic, model: UB-WIFI.
Yoosee_3.jpg

The PCB board of the camera, a square shape aluminium metal is on the top of CPU. It helps heat dissipation, hence offering stable performance.

Flash memory: MX25L12805D, 128M bit CMOS serial flash
Audio amplifier: 8002B, Hi-Fi audio IC
EPPROM: 24C040 4 Kbit Serial I2C Bus EEPROM
Power management: AMS1117 Low Dropout Voltage Regulator
Yoosee_6.jpg

The close look of SMD Infrared LED, high power, high conversion rate, IR illumination range up to 5-10 meters. Beneath the IR LED, there is a square aluminum metal for heat dissipation.
Yoosee_2.jpg

Yoosee_1.jpg
 
Last edited:
Back
Top